Follow these five simple steps to assemble your Montecito Bed Frame.
Unbox, unwrap, and lay all components separately on the floor similar to the image below. We recommend two people for assembly.
CONTENTS:
1 Headboard
2 Headboard Feet
2 Side Rails (both side rails are identical and may be used
on either side of the bed)
2 End Rails (1 head rail with 4 holes for the headboard
and 1 foot rail with no holes)
1 Center Support Rail
9 Slats (7 standard slats and 2 rounded slats for each end of the frame)
4 Feet (each foot fitted with inserts)
6 Connector Bolt Caps
4 - 40mm Connector Bolts
2 - 60mm Connector Bolts
4 - 70mm Connector Bolts
5mm Allen Key (black for connector bolt caps)
4mm Allen Key (silver for connector bolts)
Step 1: Connect Legs to End Rails
Screw and tighten legs to the end rails using the 40mm connector bolts.
Step 2: Connect Side and End Rails
Insert side rails fasteners to end rails. Push down to lock side rails.
Step 3: Attach Headboard Feet
Screw on the lower row of the headboard feet with 70mm connector bolts and connect with the bolt caps from the back.
Step 4: Attach Headboard to the Frame
Sit the bed frame onto the headboard feet. Connect the headboard to the frame with the bolt caps and 70mm, 60mm bolts. Tighten all bolts.
Step 5: Add the Slats and Enjoy!
Fasten center support rail on to frame and place in slats.
