Marin Wood Bed Frame (No Headboard)
Follow these five simple steps to assemble your Marin Bed Frame.
Unbox, unwrap, and lay all components separately, similar to the image below, on on a soft, clean surface.
CONTENTS:
Base Components:
1 Headrail Skirt
1 Foot Rail Skirt
2 Side Rail Skirts
1 Center Stretcher
Top Frame Components:
1 Slat Set
1 Foot Rail
2 Side Rails
1 Head Rail
Included Hardware:
18 Furniture Bolts
1 Allen Wrench
Step 1:
Attach the Head Rail Skirt:
Match the dowels on the head rail skirt to the holes on the side rail skirt. Screw bolts into the back of the head rail legs to connect the side rail skirt.
Attach the Foot Rail Skirt:
Align the foot rail skirt to the side rail skirt. Screw in bolts and tighten all sides.
Step 2:
Install the Center Stretcher:
Lower the center stretcher into the middle of the skirt base.
Step 3:
Position Side Rails:
Lay the side rails onto the base frame. Use the dowels located on the top of the skirt base to guide them into the correct position.
Connect Foot Rail:
Lift the front end of the side rails slightly. Guide the foot rail dowels into the side rails with the flat surface being right side up and bevel aligned with the side rails.
Secure Foot Rail:
Insert bolts under the foot rail to connect side rails. Screw in and tighten.
Secure Frame to the Base:
Screw in and tighten four bolts on each side rail.
Step 4:
Install the Slats:
Unroll the slats across the center stretcher and side rail supports. Each end has a stopper to secure slats.
Step 5:
Head Rail Attachment:
Slide the Marin Bed head rail into the top frame and enjoy!
Marin Wood Bed Frame (With Headboard)
Follow these five simple steps to assemble your Marin Bed Frame.
Unbox, unwrap, and lay all components separately, similar to the image below, on on a soft, clean surface.
CONTENTS:
Base Components:
1 Headrail Skirt
1 Foot Rail Skirt
2 Side Rail Skirts
1 Center Stretcher
Top Frame Components:
1 Slat Set
1 Foot Rail
2 Side Rails
1 Headboard
Included Hardware:
18 Furniture Bolts
1 Allen Wrench
Step 1:
Attach the Head Rail Skirt:
Match the dowels on the head rail skirt to the holes on the side rail skirt. Screw bolts into the back of the head rail legs to connect the side rail skirt.
Attach the Foot Rail Skirt:
Align the foot rail skirt to the side rail skirt. Screw in bolts and tighten all sides.
Step 2:
Install the Center Stretcher:
Lower the center stretcher into the middle of the skirt base.
Step 3:
Position Side Rails:
Lay the side rails onto the base frame. Use the dowels located on the top of the skirt base to guide them into the correct position.
Connect Foot Rail:
Lift the front end of the side rails slightly. Guide the foot rail dowels into the side rails with the flat surface being right side up and bevel aligned with the side rails.
Secure Foot Rail:
Insert bolts under the foot rail to connect side rails. Screw in and tighten.
Secure Frame to the Base:
Screw in and tighten four bolts on each side rail.
Step 4:
Install the Slats:
Unroll the slats across the center stretcher and side rail supports. Each end has a stopper to secure slats.
Step 5:
Headboard Attachment:
Fit the headboard into the frame slots and enjoy!
