Our stunning Malibu Platform Bed Frame + Headboard will brighten any room. Made in our Los Angeles shop from the same FSC® certified (C156318) maple as the rest of our Malibu line, the bed frame and headboard are easy to set up.

For the Frame

  1. Take account of your parts. You should have two base pieces, 10 legs with levelers in each, three screws, an allen wrench, and slats.

  2. Place the bed frame platforms upside down.

  3. Insert each of the legs in the pre-drilled holes on the underside of the two frames.

  4. Slide the two platform pieces so that the dowels go into the holes on the opposite side.

  5. Insert the screws on the inside of the platform and tighten with an allen wrench.

  6. Once the platforms are screwed together, flip the base over so it’s right side up.

  7. Place the slats on the platform so they line up with the slots on the sides of the frame.

For the Headboard

  1. Take account of your parts. You should have two headboard pieces and five screws.

  2. With the front side on the floor, slide the headboard pieces together, so the dowels go into the holes on the opposite side.

  3. Insert each of the screws on the back side of the headboard and tighten with the allen wrench.

  4. Once connected, flip the headboard so it’s standing up.

  5. Slide the headboard to the frame so the holes on the headboard line up with the holes on the bed frame.

  6. Insert screws in each of the holes and tighten with an allen wrench.

  7. Enjoy your new bed frame!

Did this answer your question?